M (UHMW-PE) CHEMICAL PROPERTIES
Polystone® M Chemical Properties
| Chemical Resistance | Polystone® M (UHMW-PE) | Polystone® M (UHMW-PE) | |
|---|---|---|---|
| Acetaldehyde | + | Glycerine | + |
| Acetic acid | + | Hydrochloric acid | + |
| Acetone | + | Hydrogen peroxide | + |
| Acrylonitrile | + | Hydrogen sulphide | + |
| Allyl alcohol | 96+ | Lactic acid | + |
| Aluminum chloride | A+ | Magnesium chloride | A+ |
| Ammonia | A+ | Mercury | + |
| Ammonium chloride | A+ | Methanol | + |
| Aniline | + | Methyl ethyl ketone | + |
| Benzaldehyde | + | Methylene chloride | / |
| Benzene | / | Mineral oil | + |
| Benzyl alcohol | + | Motor oil | + |
| Bleach (Chlorine) | - | Nitric acid | +to/ |
| Boric acid | A+ | Nitobenzene | + |
| Butanol | + | Oleic acid | + |
| Butyl acetate | + | Ozone | / |
| Calcium chloride | + | Perchloric acid | 50+ |
| Carbon disulphide | / | Petroleum | + |
| Carbon tetrachloride | /M- | Phenol | + |
| Chlorine gas | / | Phosphoric acid | + |
| Chlorobenzene | / | Potassium chromate | 40+ |
| Chloroform | /M- | Potassium hydroxide | 30+ |
| Chromic acid | 10+ | Potassium nitrate | + |
| Citric acid | + | Potassium permanganate | + |
| Cyclohexanol | + | Pyridine | + |
| Cyclohexanone | + | Sea water | + |
| Dekalin | + | Sodium carbonate | 10+ |
| Dibutyl phthalate | + | Sodium chloride | 10+ |
| Diesel fuel | + | Sodium hydroxide | 60+ |
| Diethyl ether | +to/ | Sulphuric acid | 75+ |
| Dioxane | + | Tallow | + |
| Ethanol | 96+ | Tetrahydrofurane | +M- |
| Ethyl acetate | + | Tetralin | + |
| Ethylene chloride | / | Thionyl chloride | - |
| Ethylene diamine | + | Toluene | / |
| Ferric chloride | A+ | Transformer oil | + |
| Fluorine | - | Trichlorethylene | +M- |
| Formaldehyde | 40+ | Urea, aqueous | 33+ |
| Formic acid | + | Water | + |
| Furfurol | + | Zinc chloride | A+ |
Values obtained at room temperature. Call for high or low temperature applications. Number indicates concentration if < 100%. M= Values may change under mechanical stress G=Gaseous state. A=Aqueous solution. S=Soluble.
+= Specimen is resistant.............Swelling <3% or weight loss <0.5%. Break elongation not significantly altered.
/= Specimen has limited resistance...Swelling 3-8% or weight loss 0.5-5% and/or break elongation decreased by <50%
-= Specimen is not resistant.........Swelling > 8% or weight loss > 5% and/or break elongation decreased by >50%
All information and recommendations regarding properties and applications are based upon tests and data believed accurate. Any particular application is the sole responsibility of the user. No warranty is expressed or implied. Under no circumstances shall we be liable for incidential or consequential loss.